...and off , or the serial cable running close to high power lines . The isolation also helps eliminate ground loops caused by different potentials on the grounds . The ICD103A can also be used as a repeater to extend the RS - 232 signal beyond 50 feet...
...installed and used in accordance with the instruction manual , may cause harmful interference to radio communications . Operation of this equipment is a residential area is likely to cause harmful interference in which case the user will be required...
...MULTIMODE FIBER OPTIC CABLE AT DISTANCES OF UP TO 30 KM ( DEPENDING ON THE SFP USED , FIBER TYPE , AND FIBER BANDWIDTH * ) § SUPPORTS TRANSPARENT USB EXTENSION VIA TWO USB 2.0 PORTS PLUS TWO USB 1.1 PORTS FOR USB HUBS OR USB HIDS SUCH AS TOUCHSC...
...installed and used according to the instructions in this manual , together with the specified cables and the maximum cable length < 3m , the Units : ACS1009A , ACS2209A ACS4001A , ACS4201A are shielded against the generation of radio interference...
...Attach the power cable and , on AC power supplies , move the toggle switch to the ON position . When the unit is receiving power , the green PWR ( power ) LED will light . Black Box Customer Service Call : ( 724 ) 746 - 5500 Phone orders 24 h...
...correct DB - 9 RS - 232 cable with female DB - 9 connector . RS - 232 cable is used for connecting a terminal or terminal emulator to the Managed Switch’s RS - 232 port to access the command - line interface . Attach the DB - 9 serial port on th...
...are installed . USB cable . Computer 1 . Place the units where desired , and connect the CAT5 extension link cabling to the link ports ( RJ - 45 ) on the Local Extender and the Remote Extender . Figure QS - 2 . Connecting the Local Extender to t...
...installed and used according to the instructions in this manual , together with the specified cables and the maximum cable length < 3m , the Units : ACS1009A - MM , ACS2209A - MM ACS4001A - MM , ACS4201A - MM ACS1009A - SM , ACS2209A - SM ACS4001...
...2 . Use a USB cable ( Type - A to Type - B ) to connect a USB port on each computer to the respective USB ports of the unit . 3 . Optionally connect a stereo audio cable ( 3.5mm to 3.5mm ) to connect the audio output of the computers to th...