Description TM TheFlexPoint Wall - Mounting kit was designed to attach one FlexPoint module to a wall , back - board or other flat surface . The kit includes the following hardware : LMC206 - WALL ( 2 ) “ L ” shaped brackets . ( 4 ) Flat head screws...
...stations , hubs , and switches over multimode fiberoptic links up to 2 km long . You can use TRFEs with most “ classic ” ( standard ) Token Ring products and protocols and newer “ Dedicated Token Ring ” equipment , including : • Classic Token Ring...
...needs ! * This manual will tell you all about your new ServSwitch ™ Duo Extender , including how to install , operate , and troubleshoot it . For an introduction to the Extender , see Chapter 2 . The Extender product codes covered in this m...
...Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks , and ServSwitch is a trademark , of BB Technologies , Inc . Mac is a registered trademark of Apple Computer , Inc . Linux is registered trademark of Linu...
ICD103A 304 pg . 1 / 2 6131 Model ICD103A DIN Rail Mountable RS - 232 Isolator CE Overview The ICD103A is a DIN rail mountable RS - 232 optical isolator . It isolates four RS - 232 lines at 2KV , two lines in each direction . The signals can be data...
Installation This installation guide gives step - by - step instructions about how to install the LB9007C - ST Selecting a combination for the plug - in module of LB9007C - ST Fiber Plug - In Modules are available for Mulit - mode with ST , SC , MT ...
Shopping Basket
Sign in
