...with GG-45 Connector (RJ-45 compatible) or TERA Connector • Category 7/Class F cable can be terminated with two interface designs as specified in IEC 6063-7-7 and IEC 61076-3-104. One is an RJ-45 compatible GG-45 connector. The other is the more c...

...is similar to the MT-RJ connector. The MPO’s ferrule surface of 2.45 x 6.40 mm is slightly bigger than the MT-RJ’s, and the latching mechanism works with a sliding sleeve latch rather than a push-in latch. • The MPO connector can be either male o...

...two embedded plastic optic fibres. No need to unplug the cable, just place the Light Injector over the RJ-45 plug at one end and the opposite end will light up for a 100% failsafe identification. • Learn more: • Solid vs Stranded Patch Cables •  

...two pairs. If you have a 3 + 1 cable, the three pairs of similar length will be more tightly twisted than the fourth. The three similar pairs can then be “pair swapped“ onto the RJ-45 pins that carry RGB signals and the fourth can be used for data.

...conductors. When the RJ-45 connector is crimped, the contacts inside will pierce the conductor insulation. • Untwist the wires to within 1/8" of the jacket. Arrange the wires according to the cable spec (568B in this case). Flatten and align the ...

...2.0, (2) USB 3.0 • (1) RJ-45 (10/100/1000 Mbps) • (1) RJ-45 (10/100/1000 Mbps) • (1) eSATA • (1) eSATA • (2) HDMI-F on models with HD Video capture •   • Optional USB to RS-232 adaptor • Optional USB to RS-232 adaptor •   •   • (1) 4-pin mini DIN F...

...75-ohm) coax wires; RJ-45 connectors are used for the balanced version, and a pair of BNC connectors is used for the unbalanced interface. Both operate within Layer 1 (the Data-Link Layer) of the seven-layer OSI model. • There are also two types...

...an Ethernet switch with RJ-45 ports? No problem! Use a converter to attach legacy AUI and BNC or new fibre segments. • What are Media Converters? • Media converters are simple networking devices that enable you to interconnect networks or network de...