...Shielded vs. unshielded cables • Shielded vs. unshielded cables • The environment determines whether cable should be shielded or unshielded. Quiet office environments, busy retail establishments, and individual workshops all require different levels...

...Fibre • Multimode fibre cable has a large-diameter core and therefore has multiple modes of propagation—that is, several wavelengths of light are used in the fibre core. It’s primarily used for lighter- capacity or shorter-distance applications. • M...

...wire pairs within a cable. Alien Crosstalk, in 10-GbE systems, is the measurement of the signal coupling between wire pairs in different, adjacent cables. • Factors that affect Alien Crosstalk • The amount of ANEXT depends on a number of factors...

...or remotely using a modem or TCP/IP Ethernet connection. • The software is available conveniently preloaded on a PC we ship to you or included with your Tiger II Controller system. • Use the Windows® compatible software’s GUI to define system pa...

...and Etherlink II modems only know two PAM modes (16 and 32), Etherlink IV  works with PAM modes from 4 to 128. Although the PAM mode does not directly affect the transmission speed, it is, however, crucial to it. The speed is directly calcula...

...more. You can run fibre cable next to industrial equipment without worry. Fibre is also less susceptible to temperature fluctuations and can be submerged in water. • Security • Fibre doesn't radiate signals and is extremely difficult to tap. If it i...

...signals over CATx cable up to 100 metres (330 feet), and even farther with the addition of network switches. • Flexible topology with many options • Configure the Agility for point-to-point extension, multicasting, single-target sharing, and K...

...connecting IEEE-488 cables, some rules apply. The total number of devices should be 15 or less. The total length of all cables should not exceed 2 metres multiplied by the number of connected devices, up to a maximum of 20 metres. And no more th...