Intelligent Movement Sensors

Security Contact
is an open/closed contact switch that indicates Alarm or Normal. A disconnect alarm alerts you when doors to secure areas have been opened. The contact switch can be used in a series with multiple sensors sharing a single port.

Motion Detection Sensor
detects motion in a 60° angle within maximum distance of 3 m. Connect up to 10 motion detectors on a single sensor port.

Airflow Sensor
provides an On/Off alarm signal for airflow. Two LEDs indicate the status of airflow and that the sensor is properly plugged into the ServSensor.

Airflow Sensor

Connections Output — (1) RJ-45 M with 1.5 m cable
Sensor type — Thermistor
Measurement range — 0-100%
Measurement rate — One reading/s
Max. cable length — 30m
Management Indicators — (1) host connection, (1) status LED
Dimensions — 6.5H x 6W x 3.5D cm
Power — Powered by ServSensor, no external power supply required

Security Contact

Connections Output — (1) RJ-45 M with 4.5 m / 18.0 m / 30.4 m UTP cable
Sensor type — Magnetic contact
Measurement Range — Open/closed
Measurement Rate — One reading/s
Max. Cable Length — 300m
Power — Powered by ServSensor, no external power supply required

Motion Detector

Connections — Output: (1) RJ-45 F; Cascade: (1) RJ-45 F
Sensor Type — Passive Infrared (PIR)
Detection Speed — 0.3 — 3 Hz
[b]Sensitivity — 3m
Detection Angle — 60°
Mounting Height — 1.8-3 m
Measurement rate — One reading/s
Max. Cable Length — 300m
Management Indicators — (1) power, (1) alarm LED
Dimensions — 8H x 6W x 3.6D cm
Operating Temperature — -20 °C to 50 °C
Power — Powered by ServSensor, no external power supply required