Gigabit PoE+/PSE Media Converter

This tough media converter is the ideal way to extend your network over fiber and also power a PoE+ device. Use it to link to faraway PoE+ devices such as IP security cameras, wireless access points, and VoIP phones.

Fiber Options
All models of the Gigabit PoE+ PSE Media Converters feature two autosensing 10/100/1000 UTP ports. On the fiber side there are three options to choose from: LGC5211A provides one multimode fiber port that can extend a network connection up to 550 meters, LGC5212A has one single-mode fiber port to extend a network connection up to 15 kilometers and LGC5210A finally offers an SFP port that can be customized to virtually any interface—including multimode fiber, single-mode fiber, or Gigabit copper—through the use of a standard SFP.

Power over Ethernet
Both UTP ports support 802.3at Power over Ethernet Plus, enabling the converter to power a PoE+ PD device.

Power Options
The Gigabit PoE Media Converter can be powered three ways: from an AC power supply (LGC5210-PS included), via the DC power jack, or via the DC terminal block. When used with DC power to the terminal block, the converter supports an extended operating temperature range of 0 to +70° C.

The converter requires only one power source to power both the converter and a PoE+ device; you can position the PoE+ device up to 100 meters (328 feet) away from the converter, enabling flexible placement of wireless APs and security cameras. A pair of input terminals and output terminals enables you to cascade DC power in a DIN rail installation (optional DIN Rail Clip (LXC-DR) is sold separately).

Connectors —
All: Copper side: (2) RJ-45;
LGC5210A:Fiber side: (1) SFP
LGC5211A/LGC5212A: Fiber side: (1) pair of SC
Ethernet Connection —
10/100/1000BaseT
Auto Negotiation
AutoCross
Flow Control
10240 MTU
Full Line-Rate Forwarding
Power —
AC Desktop Adapter (LGC5210-PS, included): Input: 100 to 240 ±10% VAC, 50/60Hz, 2A, Output: 52 VDC, 2.31A
DC input: 51 to 57 VDC on DC terminal block , 51 to 57 VDC on DC jack
Power consumption: 65W max (PSE + PD), 5W max (PSE)
Size — 2H x 9.2W x 9.7D cm (0.8"H x 3.6"W x 3.8"D)
Environmental —
Operating temperature: 0 to +70° C (+32 to +158° F) DC terminal block; 0 to +50° C (+32 to +122° F) AC adapter;
Operating humidity: 5 to 95% noncondensing
Standard Conpliances —
IEEE 802.3af Power Over Ethernet
IEEE 802.3at PoE+ Standards
IEEE 802.3 Ethernet Standards
IEEE 802.3u Auto-Negotiation
RFC-2474
RFC-2475 DiffServ QoS