Tired of trying to figure out how to configure DCE equipment? Our Async RS-232↔2-Wire RS-485 Interface Converter is ready to go right out of the box-no configuration is necessary. In minutes, your data will fly between RS-232 and RS-485 interfaces at speeds up to a zippy 115.2 kbps!
The Async RS-232↔2-Wire RS-485 Interface Converter provides big-time performance in a small package. It derives its power from RS-232 data and control signals, so no batteries or clunky AC power adapters are required.
Transmit and receive data are passed in each direction. You get async, point-to-point operation for your 2-wire, half-duplex applications. Connector options include DB25 female connectors matched with either an RJ-45 connector or a terminal block with built-in strain relief. Get the distance you need, too.
The Async RS-232↔2-Wire RS-485 Interface Converter has a range of up to 1 200 m. Once installed, the converter operates transparently as if there were a standard cable connection. All data signals from the RS-232 and RS-485 interfaces are passed straight through.
Distance (Maximum) — 1219.2 m
Operation — 2-wire, RS-485, half-duplex, point-to-point
Protocol — Async
Speed (Maximum) — 115.2 kbps
Transmitter Control — Data
Connectors — (1) 5-screw terminal block, (1) DB25 F
Power — From the RS-232 interface
Size — 1.8H x 5.3W x 8.4D cm;
NOTE: The RS-232 RTS (Pin 4) and CTS (Pin 5) are tied together. DSR (Pin 6), DCD (Pin 8) and DTR (Pin 20) are all tied together.
Shopping Basket
Sign in
Contact Us
