Photo may vary from actual product
|
|
|
|
|
|
Accessories
LanXPLORER is the first handheld network maintenance and troubleshooting tool capable of testing active LAN connections over both copper and fibre*. Most tests can also be performed through a Wi-Fi connection liberating the user from having to a make physical connection to the network.
Packed with features designed to quickly identify and isolate device-to-network connectivity problems in any enterprise, campus or industrial Ethernet environment. The powerful Net Map/Net Verify function compares a previously stored network device list against the current device list making any changes to the network instantly identifiable. The inline Gigabit mode allows users to non-intrusively monitor network traffic including VoIP calls, run PC diagnostics, verify connection speed, protocols, PoE/PoE+ and much more.
NOTE* To test fibre order one of the additional SFPs.
Network Tests over Copper & Fibre
• Identification of active devices with Network Discovery function.
• Comparison of active network devices against historical data with Network Verify.
• DHCP client, Ping and Traceroute tests with VLAN support.
• Full bandwidth Layer 1, 2 and 3 Loopback device.
• Diagnostic statistics including Top Ten talkers, protocols, error generators and packet size distribution.
Copper Features
• Best-in-class Wiremapper - test cables by pin as well as by pair with split pair detection and length measurement.
• Wire tracing function in combination with an Amplifier Probe.
• Detection of PoE and PoE+ with voltage, current and power measurements in endpoint and In-Line modes.
• Hub blink test with colour-switching on supported devices.
• 10/100/1000BASE-T Support.
• Network monitoring with In-Line tests and PC diagnosis function.
• Monitoring of VoIP calls and quality, including RTP jitter.
Optical Fibre Features
• Single-Mode and Multimode SFP options.
• 1000BASE-SX, LX and ZX support.
• Hub blink.
Wi-Fi Features
• Identification of active network devices with Network Discovery function.
• Comparison of active network devices against historical data with Network Verify.
• DHCP client, Ping and Traceroute tests with VLAN support.
• 802.11 b, g and n support.
• Identification of access points, Service Set Identifiers (SSID), channels in use, signal strength and security settings.
• Detection of channel conflicts.
Number of ports — (2) Copper, (1) Fibre and (1) Wi-Fi
Dimensions — 20.5H x 9.8W x 4.5D cm
Weight — Unit: 0.65 kg (including batteries)
Batteries — 150000, 150002, 150004: (6) AA Alkaline; 150001, 150003, 150005: NiMH (battery pack)
Operating time with rechargeable batteries — 4 hours under normal operating conditions
Charging time — 8 hours in instrument
Operating Temperature — 0 to 40°C (use only when instrument temperature is close to ambient temperature)
Storage Temperature — -20 to +70°C
Relative Humidity — 5 to 90%, non-condensing
(1) LanXPLORER PRO Tester;
(1) Remote adaptor #1;
(1) NiMH battery pack;
(1) Power Supply with EU/UK adaptor;
(1) External USB high sensitivity WiFi Antenna;
(1) Amplifier probe
(1) RJ45 Insert Extraction Tool
(10) Lifejack RJ45 inserts
(2) Patch cables, 30cm, CAT5e STP;
(1) Manual on CD;
(1) Quick Starter Guide;
(1) Carry case
|
|
Actions
Datasheets
Manuals
|