The Black Box website uses cookies.
By continuing the use of the Black Box website, or by pressing the agree button on the right, you consent to the use of cookies on this website. More information.
Home > Resources > Technical Resources > Black Box Explains > LAN > Layer 2, 3, and 4 switching
Layer 2, 3, and 4 switching

Layer 2, 3, and 4 switching

The Open Systems Interconnection (OSI) Reference Model provides a layered network design framework that establishes a standard so that devices from different vendors work together.

OSI Model for Open Systems Interconnection

Layer 2 (The Data-Link Layer)
Layer 2 switches operate using physical network addresses. Physical addresses, also known as link-layer, hardware, or MAC-layer addresses, identify individual devices. Most hardware devices are permanently assigned this number during the manufacturing process.

Switches operating at Layer 2 are very fast because they’re just sorting physical addresses, but they usually aren’t very smart.

Layer 3 (The Network Layer)
Layer 3 switches use network or IP addresses that identify locations on the network. Physical addresses identify devices; network addresses identify locations. A location can be a LAN workstation, a location in a computer’s memory, or even a packet of data traveling through a network.

Network addresses are hierarchical. The more details included, the more specific the address becomes and the easier it is to find.

Switches operating at Layer 3 are smarter than Layer 2 devices and incorporate routing functions to actively calculate the best way to send a packet to its destination. However, because Layer 3 Switches take the extra time to read more details of a network address, they are sometimes much slower than Layer 2 Switches.

Layer 4 (The Transport Layer)
Layer 4 of the OSI Model coordinates communications between systems. Layer 4 identifies which application protocols (HTTP, SNTP, FTP, etc.) are included with each packet and uses this information to hand off the packet to the appropriate higher-layer software. Layer 4 switches make packet forwarding decisions based not only on the MAC address and IP address, but also on the application a packet belongs to.

Because Layer 4 devices enable you to establish priorities for network traffic based on application, you can assign a high priority to packets belonging to vital in-house applications, such as Peoplesoft®, with different forwarding rules for low-priority packets, such as generic HTTP-based Internet traffic.

Layer 4 switches also provide an effective wire-speed security shield for your network.

For more information on managed verses unmanaged switches, check out our Black Box Explains: The difference between managed, unmanaged, and web-smart switches.

Share |