Hubs
Single Input Interface
-Takes audio Input (RCA) and converts to A-BUS output (RJ-45).
-Enables standard receivers to connect via single CAT5 to structured cabling.
-Powers by automatic music sensing or voltage trigger from status input.
- DSAP1 power supply
2 Zone Single Source Hub
-Two-room hub with infrared outputs and status.
-Will power up by either auto music sensing or voltage trigger from status input.
- DSAP1 power supply
4 Zone Single Source Hub
-Four-room hub with infrared outputs and status.
-Will power up by either auto music sensing or voltage trigger from status input.
- DSAP1 power supply
4 Zone, 4 Sub Zone Multi Source Hub
-Surface mount hub with four stereo inputs (RCA) with four dual-zone A-BUS (RJ-45) outputs (A & B each).
-Expansion output to either main system amplifier or additional DSAH4.
-Input level adjustment, routed emitter ports, common IR output, 12 volt trigger, system status and talkback LEDs.
-1 x Programmable remote.
- DSAP1 power supply

Input Modules
Local Input Module (LIM) in-wall
-Enables input of local signal source located in the zone.
-Automatic signal switching.
-RCA inputs.

Keypads
Standard Keypad
-Rotary knob volume control.
Infrared Keypad
-Rotary knob volume control.
-Infra-Red relay and status indication.
Touch Button Infrared Keypad
-Touch button volume control.
-Infrared and remote control level adjustment.
Multi-Source Keypad
-Touch button volume control up/down.
-Infrared and remote control level adjustment.
-4-source selection left/right.
-Backlit volume level and source input indication.
-1 x DSAA2 mini remote control.
Back Box for A-BUS keypad
-This special back box must be used for the A-BUS keypads.

Speakers
A-BUS 6 1/2inch Speakers (Pair)
A-BUS high quality speakers are available in two forms, Active and Passive. The Passive speakers are used with the A-BUS keypads, the Active speakers are used without the keypads as the CAT5e cable runs all the way to the right speaker.